3 results for “springback”

Set a search alert

Research ArticleOpen accessEvery word in the titleTwist Springback Measurement of Autonomous Underwater Vehicle Propeller Blade Based on Profile DeviationAhmad Baharuddin Abdullah, Mohd Sapuan Salit, Zahurin Samad et al.Geometrical defects that are attributable to springback are among the major defects induced by the sheet metal forming process. Such defects are critical for sections with varying thickness, such as Autonomous Underwater Vehicle (AUV) propeller blades. In this study, the springback in the twist-bending of an AA6061 propeller blade was quantified by comparing the targeted and manufactured profiles obtained using … …American Journal of Applied Sciences, Vol. 10, Issue 5 · 31 May 2013 · 7,380 accessesView PDF Cite

Research ArticleOpen accessEvery word in the titleFracture and springback on Double Bulge Tube Hydro-FormingF. Djavanroodi, M. GheisaryThis research aims to establish a basic understanding of Double Bulge Tube Hydro-Form processing of stainless steel deep drawn cups. The method is briefly reviewed by carrying out experimental tests and Finite element analysis. By measuring bulge height in both formed curves by Coordinate measuring machine (CMM) and thickness variation specimen by Ulterasonic thickness measurment device (UTM), it has been … …American Journal of Applied Sciences, Vol. 5, Issue 8 · 31 Aug 2008 · 6,889 accessesView PDF Cite

Research ArticleOpen accessIn the abstractAnalytical and Numerical Analysis of Free Bulge Tube HydroformingF. Djavanroodi, M. Gheisary, H. Zoghi-shalFree bulge hydroforming simulation was analysied to investigate the biaxial behavior of extruded aluminum tubes. A finite element model was constructed to simulate the hydroforming process and asses the influence of friction between die walls and tube, tube material properties and springback of formed tube. It was found that material hardening coefficient had the most significant influence on formability characteristics … …American Journal of Applied Sciences, Vol. 5, Issue 8 · 31 Aug 2008 · 6,863 accessesView PDF Cite