Preparation of Magnetorheological Fluids Using Different Carriers and Detailed Study on Their Properties
Vikram G. Kamble1, Shreedhar Kolekar2 & Chetan Madivalar3 Show affiliations
- Proof and Experimental Establishment (DRDO), India
- St Joseph Engineering College, India
- Eastern Michigan University, United States
Current Research in Nanotechnology, Volume 6, Issue 1, pp. 7–15 · doi.org/10.3844/ajnsp.2015.7.15
Abstract
High sensitive and intelligence are the main function of the Magneto Rheological Fluids (MRF). In this research work, magneto rheological samples are prepared with two different carrier oils (Honge and Castor) independently. Both the samples are mixed and prepared with same concentration of iron particles. In order to reduce the sedimentation fine lithium grease is added as stabilizer for both samples. The flow properties are examined by cup and bob type rheometer. Then comparative study is made on the properties like shear stress, strain, shear rate, dynamic viscosity, angular frequency, storage modulus, loss modulus and loss factor.
Licence and reuse
Open access. This article is licensed under a Creative Commons Attribution 3.0 Licence (CC BY 3.0), as printed on the article, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original authors and the source. No permission is needed.
How to reuse this articleResponses (0)
About this article
Kamble, V. G., Kolekar, S. & Madivalar, C. (2015). Preparation of Magnetorheological Fluids Using Different Carriers and Detailed Study on Their Properties. Current Research in Nanotechnology, 6(1), 7–15. https://doi.org/10.3844/ajnsp.2015.7.15
- Licence
- CC BY 3.0
- Issue
- Volume 6, Issue 1
- Policies
- Editorial independenceUse of generative AIData availabilityAppeals and complaints
- Version
- Version of record