73 articles for “3D solids”

Research ArticleOpen accessIn the abstractPerformance Evaluation of a Waste Stabilization Pond in a Rural Area in EgyptMahassen M.E.D. Ghazy, Waled M.E. Senousy, Azza M.A. Aatty, Mohammed KamelThe performance evaluation of the waste stabilization pond (WSP) as a model of domestic wastewater treatment unit in rural area was carried out. The unit comprised of anaerobic, facultative and maturation ponds in two series. The effluents of WSP which are discharged in the drain had the BOD reduced to 109-245 mg L-1 (Mean = 145.3 mg L-1, 50.65% removal), … …American Journal of Environmental Sciences, Vol. 4, Issue 4 · 31 Aug 2008 · 8,528 accessesView PDF Cite

Research ArticleOpen accessIn the abstractNumerical Simulation of 2_D Turbidity Currents and Wall JetM.H. Shojaeefard, K. Goudarzi, H. Ghasvari JahromiDense underflows are continuous currents, which move down the slope due to the fact that, their density are heavier than ambient water. In turbidity currents the density differences arises from suspended solids. Vicinity of the wall make density currents and wall jets similar in some sense but Variation of density cause this flows more complex than wall jets. An improved … …American Journal of Applied Sciences, Vol. 4, Issue 11 · 30 Nov 2007 · 7,036 accessesView PDF Cite

Research ArticleOpen accessIn the abstractChromium (III) Removal and Recovery from Tannery Wastewater by Precipitation ProcessAbass Esmaeili, Alireza Mesdaghi nia, Reza VazirinejadChromium (III) salts are the most widely used chemicals for tanning processes, but 60-70% of total chromium salts reacts with the hides. In the other word, about 30-40% of the chromium amount remains in the solids and liquid wastes (especially spent tanning solutions). Therefore, the removal and recovery of the chromium content of these wastewaters are necessary for environmental protection … …American Journal of Applied Sciences, Vol. 2, Issue 10 · 31 Oct 2005 · 8,681 accessesView PDF Cite