PSHA Study Using EZ-Frisk Software Case Study Baychebaq Dam Site
Hadi Jarahi1 Show affiliations
- Islamic Azad University (IAU), Iran
Current Research in Geoscience, Volume 7, Issue 2, pp. 37–46 · doi.org/10.3844/ajgsp.2017.37.46
Abstract
Awareness of seismicity, is the earliest requirement in seismic design of Dam constructions. This article is devoted to study on Seismotectonic and seismicity and also seismic risk analysis of the Baychebaq reservoir dam. These studies involve detecting seismic sources and assessing seismicity parameters. According to the studies, Peak Ground Acceleration (PGA) is 0.1 gal. This PHA may be related to there activation process of Takhte Soleiman which can produce an event around 6.8 Ms in the distance of 20 km from Baychebaq dam. According to the changes of Uniform Hazard Spectrum (UHS), Spectral acceleration parameter increases from period of 0 (0.03 gal) to a period of 0.175 (0.1 gal) and then reduced slightly. Based on the results, the controlling earthquake has a magnitude of 6.1 and 6.5 Mw at a period of 0 for return periods of 475 and 2475 years.
Licence and reuse
Open access. This article is licensed under a Creative Commons Attribution 3.0 Licence (CC BY 3.0), as printed on the article, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original authors and the source. No permission is needed.
How to reuse this articleResponses (0)
About this article
Jarahi, H. (2017). PSHA Study Using EZ-Frisk Software Case Study Baychebaq Dam Site. Current Research in Geoscience, 7(2), 37–46. https://doi.org/10.3844/ajgsp.2017.37.46
- Licence
- CC BY 3.0
- Issue
- Volume 7, Issue 2
- Policies
- Editorial independenceUse of generative AIData availabilityAppeals and complaints
- Version
- Version of record
