A Novel Prototype of a Small-Scale Solar Power Plant: dynamic Simulation and Thermoeconomic Analysis

The paper presents an innovative prototype of a solar power plant, purposely designed for small-scale applications such as residential and/or small commercial buildings. The system consists of 10 kW_e Organic Rankine Cycle (ORC) plant and innovative solar thermal collectors. In particular, 235 m² of flat-plate evacuated solar collectors are designed to heat diathermic oil up to 180°C. A variable volume pump is managed by a feedback controller in order to obtain the desired outlet set point temperature for the different weather/load conditions. The hot diathermic oil passes through a storage tank, which is adopted with the purpose to reduce the oscillations due to the solar radiation variability. By means of the tank, a better exploitation of solar energy is also achieved, reducing the time-shift between production and demand. For achieving a constant ORC inlet temperature the tank outlet hot diathermic oil passes through a gas-fired burner, which provides auxiliary additional thermal energy. Therefore, the ORC simultaneously produces electrical energy and low temperature (45°C) cogeneration heat. This solar power plant was dynamically simulated in TRNSYS environment. The simulation tool includes a novel model in order to simulate the dynamic thermal behavior of solar collectors, whereas the ORC dynamic was simulated by means of a performance data map provided by the manufacturer. The model also includes a tool for the calculation of energy and economic parameters and the evaluation of the optimum thermoeconomic configuration. Results indicated that the best pay-back period is obtained for a solar field area of about 200 m² and a solar fraction of about 75%. Nevertheless, the system may be competitive from the economic point of view only if incentives can be made available, as commonly occurs for renewable applications, i.e., solar systems. This prototypal system aims to become a potential solar power system for small residential and/or commercial buildings. The presented study will be suitably used as a basis for the installation of a working prototype in located Naples, Italy.