Mixed Nickel Cobalt Manganese Oxide Nanorods for supercapacitor application
Rajat Mondal1, Surjit Sahoo1 & Chandra Sekhar Rout1 Show affiliations
- Indian Institute of Technology Bhubaneswar, India
American Journal of Engineering and Applied Sciences, Volume 9, Issue 3, pp. 540–546 · doi.org/10.3844/ajeassp.2016.540.546
Abstract
Mixed Nickel Cobalt Manganese oxide (NiCoMn-Oxide) is a new class of excellent material for supercapacitor application. Here, hydrothermal synthesis technique has been employed to prepare mixed NiCoMn-Oxide nanorods. The elemental composition and morphology of this material were validated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and EDX techniques. To analyze the capacitive performance of this material, cyclic voltammetry and galvanostatic charge-discharge tests were performed. A maximum specific capacitance of ~500 F/g was obtained for the mixed NiCoMn-oxide material within a potential range of -0.5 to 0.5 V (Vs. Ag/AgCl) in 2 M aqueous KOH solution.
Licence and reuse
Open access. This article is licensed under a Creative Commons Attribution 3.0 Licence (CC BY 3.0), as printed on the article, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original authors and the source. No permission is needed.
How to reuse this articleResponses (0)
About this article
Mondal, R., Sahoo, S. & Rout, C. S. (2016). Mixed Nickel Cobalt Manganese Oxide Nanorods for supercapacitor application. American Journal of Engineering and Applied Sciences, 9(3), 540–546. https://doi.org/10.3844/ajeassp.2016.540.546
- Licence
- CC BY 3.0
- Issue
- Volume 9, Issue 3
- Policies
- Editorial independenceUse of generative AIData availabilityAppeals and complaints
- Version
- Version of record