Three-Dimensional in Bonded Joints: A Short Review
Relly Victoria V. Petrescu1 & Florian Ion T. Petrescu1 Show affiliations
- Bucharest Polytechnic University, Romania
American Journal of Engineering and Applied Sciences, Volume 9, Issue 4, pp. 1261–1268 · doi.org/10.3844/ajeassp.2016.1261.1268
Abstract
Distributions of stress 3D in the vicinity of the overlapping corners of joints with a single lap were investigated with accuracy at present the man. A (Fe), model accurately Finite Element 3D has been carried out in order to investigate the intensity of the stress of adjustments in the plan and outside of stress by the width of the plate. The influences of the thickness of the adhesive and the Poisson distribution have been taken into account. Numerical results showed the presence of modes engaged has been detected with precision a sudden rise in the way the out-of-plan is very close to the free surface side of the fitting.
Licence and reuse
Open access. This article is licensed under a Creative Commons Attribution 3.0 Licence (CC BY 3.0), as printed on the article, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original authors and the source. No permission is needed.
How to reuse this articleResponses (0)
About this article
Petrescu, R. V. V. & Petrescu, F. I. T. (2016). Three-Dimensional in Bonded Joints: A Short Review. American Journal of Engineering and Applied Sciences, 9(4), 1261–1268. https://doi.org/10.3844/ajeassp.2016.1261.1268
- Licence
- CC BY 3.0
- Issue
- Volume 9, Issue 4
- Policies
- Editorial independenceUse of generative AIData availabilityAppeals and complaints
- Version
- Version of record