STUDY OF THE INTERFRAGMENTARY STRAIN AND THE INTERFRAGMENTARY MODULUS WITH CHANGING THE DISTANCE BETWEEN PLATE AND FEMUR
Boonthum Wongchai1 Show affiliations
- Department of Mechanical Engineering, Faculty of Engineering at Si Racha, Kasetsart University, 199 M.6, Tungsukhla, Si Racha, Chonburi, 20230, Thailand
American Journal of Applied Sciences, Volume 11, Issue 3, pp. 356–361 · doi.org/10.3844/ajassp.2014.356.361
Abstract
For several years the distance between plate and femur has been studied for preventing the damage to the blood supply by the contact pressure between plate and femur. The Limited Contact Dynamics Compression Plate (LC-DCP) is normally used to create the distance by using the locking screws. However, increasing of the distance between plate and femur affects the interfragmentary stain and the interfragmentary modulus. The interfragmentary strain is the main factor of femur-fractured healing. While the interfragmentary modulus is the new interesting factor of the stability of the femur and plate. This research proposes a study of the effect of the distance between plate and femur on the interfragmentary stain and the interfragmentary modulus. The interfragmentary strain is increased when the distance increases while the interfragmentary modulus is decreased by increasing the distance.
Licence and reuse
Free to read. This article carries the publisher’s copyright, as printed on it: © 2014 Science Publications. It is free to read; ask us before reusing it.
How to reuse this articleResponses (0)
About this article
Wongchai, B. (2014). STUDY OF THE INTERFRAGMENTARY STRAIN AND THE INTERFRAGMENTARY MODULUS WITH CHANGING THE DISTANCE BETWEEN PLATE AND FEMUR. American Journal of Applied Sciences, 11(3), 356–361. https://doi.org/10.3844/ajassp.2014.356.361
- Licence
- © Science Publications
- Issue
- Volume 11, Issue 3
- Policies
- Editorial independenceUse of generative AIData availabilityAppeals and complaints
- Version
- Version of record
