Design of 8-4 and 9-4 Compressors Forhigh Speed Multiplication
R. Marimuthu1, Dhruv Bansal1, S. Balamurugan1 & P. S. Mallick1 Show affiliations
- School of Electrical Engineering, VIT University, Vellore, India
American Journal of Applied Sciences, Volume 10, Issue 8, pp. 893–900 · doi.org/10.3844/ajassp.2013.893.900
Abstract
This study presents higher order compressors which can be effectively used for high speed multiplications. The proposed compressors offer less delay and area. But the Energy Delay Product (EDP) is slightly higher than lower order compressors. The performance of 8×8, 16×16 and 24×24 multipliers using the proposed higher order compressors has been compared with the same multipliers using lower order compressors and found that the new structures can be used for high speed multiplications. These compressors are simulated with Cadence RTL complier at a temperature of 25°C with the supply voltage of 1.2 V.
Licence and reuse
Open access. This article is licensed under a Creative Commons Attribution 3.0 Licence (CC BY 3.0), as printed on the article, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original authors and the source. No permission is needed.
How to reuse this articleResponses (0)
About this article
Marimuthu, R., Bansal, D., Balamurugan, S. & Mallick, P. S. (2013). Design of 8-4 and 9-4 Compressors Forhigh Speed Multiplication. American Journal of Applied Sciences, 10(8), 893–900. https://doi.org/10.3844/ajassp.2013.893.900
- Licence
- CC BY 3.0
- Issue
- Volume 10, Issue 8
- Policies
- Editorial independenceUse of generative AIData availabilityAppeals and complaints
- Version
- Version of record