Volume 4, Issue 1 (2020) | International Journal of Structural Glass and Advanced Materials Research

Inputs of Numerical Simulation into the Development of Shock Adhesion Tests on Advanced Materials

Michel Arrigoni — 2020-01-10

International Journal of Structural Glass and Advanced Materials Research, Published online: 10 January 2020; doi:10.3844/sgamrsp.2020.1.9

Advanced materials- such as assemblies, composites and materials obtained by additive methods - have met a great success in the industry of advanced technologies. They allow combining a variety of d...

Semi-Probabilistic Calibration of a Partial Material Safety Factor for Structural Silicone Adhesives - Part II: Verification Concept

Michael A. Kraus — 2020-01-10

International Journal of Structural Glass and Advanced Materials Research, Published online: 10 January 2020; doi:10.3844/sgamrsp.2020.10.23

This paper deals with the application of the semi-probabilistic design concept (level I) to structural silicone sealants where a generally valid verification concept is proposed. The verification conc...

Fire Resistance Testing of a Timber-Glass Composite Beam

Johan Sjöström — 2020-01-27

International Journal of Structural Glass and Advanced Materials Research, Published online: 27 January 2020; doi:10.3844/sgamrsp.2020.24.40

Glass structures have been increasingly utilised in modern construction for decades with load-bearing walls or facades as the most common elements. However, the use of glass beams has recently been gi...

ANSYS Numerical Modeling of Confined Deep Beam with High Strength Concrete

Syahril Taufik — 2020-02-10

International Journal of Structural Glass and Advanced Materials Research, Published online: 10 February 2020; doi:10.3844/sgamrsp.2020.41.55

In the numerical modeling presented, the deep beam is accounted for by means of a three dimensional FEA ANSYS 13.0 approach, in which the structure is modeled with load-displacement-based solid finite...

Semi-Probabilistic Calibration of a Partial Material Safety Factor for Structural Silicone Adhesives - Part I: Derivation

Michael Drass — 2020-03-02

International Journal of Structural Glass and Advanced Materials Research, Published online: 2 March 2020; doi:10.3844/sgamrsp.2020.56.68

This paper deals with the application of the semi-probabilistic design concept (level I) of Eurocode 0 in order to calibrate partial safety factors for structural silicone sealants. In the first part ...

Time-Temperature Dependency of Laminated Glass Subjected to Blast Load – A Numerical Study

Matthias Förch — 2020-03-18

International Journal of Structural Glass and Advanced Materials Research, Published online: 18 March 2020; doi:10.3844/sgamrsp.2020.69.81

The behavior of laminated glass has strong time-temperature dependency. Viscoelastic material models are often employed to define mechanical properties of Polyvinyl Butyral (PVB), the most common inte...

Form to Fabrication

Henning Duerr — 2020-03-23

International Journal of Structural Glass and Advanced Materials Research, Published online: 23 March 2020; doi:10.3844/sgamrsp.2020.82.96

A creative idea is always constrained with lot of factors such as aesthetics, material, fabrication, tools etc. With the introduction of the digital and robotic fabrication, some constrains can be den...

Basis of Guidelines for Structural Design and Thermal Assessment of Buildings with Hybrid CLT-Glass Elements

Nikola Perković — 2020-04-09

International Journal of Structural Glass and Advanced Materials Research, Published online: 9 April 2020; doi:10.3844/sgamrsp.2020.97.113

Facade elements are known to represent a building component with multiple performance parameters to satisfy. Among others, “advanced facades” take advantage from hybrid solutions, like the assembl...

Progressive Damage Modelling of Transverse Impact Behavior of Adhesively Bonded Composite Joints

Dimitrios Athinaios — 2020-04-03

International Journal of Structural Glass and Advanced Materials Research, Published online: 3 April 2020; doi:10.3844/sgamrsp.2020.114.129

A three-dimensional dynamic numerical model was developed, using the commercially available finite element software LS-DYNA to simulate the Low Velocity Impact (LVI) case on bonded joints consisting o...

Using a Hierarchical Weibull model to Predict Failure Strength of Different Glass Edge Profiles

David Thomas Kinsella — 2020-04-30

International Journal of Structural Glass and Advanced Materials Research, Published online: 30 April 2020; doi:10.3844/sgamrsp.2020.130.148

The edge strength of glass is analyzed using a Weibull statistical framework based on 78 data samples from a range of experiments recorded in literature. Based on the analysis, a 45 MPa strength value...

Bamboo Lightweight Shear Walls: Modeling and Identification of Sheathing-to-Framing Connections for Seismic Response Analysis

Giorgia Di Gangi — 2020-06-16

International Journal of Structural Glass and Advanced Materials Research, Published online: 16 June 2020; doi:10.3844/sgamrsp.2020.149.159

The need for enhancing the sustainability of civil constructions has originated an increasing interest in the use of engineered bamboo-based products within the building sector. Nonetheless, while the...

Optimization of Reinforced Concrete Beams and Steel Beams: A Comparative Study

Joel M. Ozimboski — 2020-06-18

International Journal of Structural Glass and Advanced Materials Research, Published online: 18 June 2020; doi:10.3844/sgamrsp.2020.160.167

In order to support the structural designer with regard to the selection of structural materials, this work presents results obtained from the optimization of reinforced concrete beams and welded “I...

Effect of Various Combustible Materials on Insulating Properties of Refractory Bricks

Isiaka Olajide Odewale — 2020-07-22

International Journal of Structural Glass and Advanced Materials Research, Published online: 22 July 2020; doi:10.3844/sgamrsp.2020.168.179

The effect of various combustible materials on insulating properties of refractory bricks produced from Enugu fire clay and Ekebedi clay has been studied. This is aimed at determining the most favoura...

Volume 1: First Steps for SGAMR

Chiara Bedon — 2020-08-28

International Journal of Structural Glass and Advanced Materials Research, Published online: 28 August 2020; doi:10.3844/sgamrsp.2020.180.181

Volume 2: and SGAMR Goes!

Chiara Bedon — 2020-08-28

International Journal of Structural Glass and Advanced Materials Research, Published online: 28 August 2020; doi:10.3844/sgamrsp.2020.182.183

Volume 3: SGAMR is Always on Track!

Chiara Bedon — 2020-08-28

International Journal of Structural Glass and Advanced Materials Research, Published online: 28 August 2020; doi:10.3844/sgamrsp.2020.184.185

Technical Stability of Very Slender Rectangular Columns Compressed by Ball-And-Socket Joints without Friction

Krzysztof Murawski — 2020-11-16

International Journal of Structural Glass and Advanced Materials Research, Published online: 16 November 2020; doi:10.3844/sgamrsp.2020.186.208

Stability of load-bearing members, as known, is a challenging issue and several tools are available for designers. Disregarding the material properties in use, the avoidance of possible stability trou...

Strengthening of Laminated Glass Windows against Windborne Debris Impact

Xihong Zhang — 2020-11-16

International Journal of Structural Glass and Advanced Materials Research, Published online: 16 November 2020; doi:10.3844/sgamrsp.2020.209.224

This paper presents numerical modelling to study potential mitigation methods to improve the impact resistance performance of laminated glass windows against timber windborne debris impact. A detailed...

Building Probability Functions by Persian Curve

Abdolrasoul Ranjbaran — 2020-10-31

International Journal of Structural Glass and Advanced Materials Research, Published online: 31 October 2020; doi:10.3844/sgamrsp.2020.225.232

Construction of a probability function for a given random data is the main theme of several branches of human knowledge, where it is an active area of study. In spite of great developments, the soluti...

Comparison of the Known Hypotheses of Lateral Buckling in the Elastic-Plastic States of Thin-Walled Semi-Slender Columns

Krzysztof Murawski — 2020-12-21

International Journal of Structural Glass and Advanced Materials Research, Published online: 21 December 2020; doi:10.3844/sgamrsp.2020.233.253

Stability of structures, as known, is a challenging issue, especially in critical engineering, i.e., in designing structures which in a wrong design process could cause a catastrophe. The avoidance of...

Uncertainty Assessment for the Buckling Analysis of Glass Columns with Random Parameters

Mohammad Momeni — 2020-12-22

International Journal of Structural Glass and Advanced Materials Research, Published online: 22 December 2020; doi:10.3844/sgamrsp.2020.254.275

Load-bearing elements composed of glass, as known, are often susceptible to buckling collapse mechanisms. This intrinsic characteristic (and thus potential limitation for design) typically derives fro...

A Reliable Method of Analysis for Geotechnical Data

Abdolrasoul Ranjbaran — 2020-12-26

International Journal of Structural Glass and Advanced Materials Research, Published online: 26 December 2020; doi:10.3844/sgamrsp.2020.276.293

Geotechnical engineering is the art of making decisions in the presence of uncertainty, where real world problems are treated and this is associated with uncertainties arising from various sources. Th...